32mm & 40mm Floplast Push-Fit Waste System

Floplast 32mm and 40mm PushFit Waste System is a quick and easy way to install waste pipes. There is no need to solvent welding the fittings to the pipe as each pushfit fitting incorporates a ring seal. It is recommended that an allowance of 10mm for expansion of pipes and fittings is given on each socket of these PushFit items. When fixing these Floplast PushFit pipes Vertically there should be a bracket every 1.2m, if fitting these Horizontally then the spacing between bracket should be reduced to 0.5m.

These Floplast PushFit Waste pipes and fittings are made in Polypropylene which is light and easy to use.

These PushFit Waste products are sold as Individual Items or at our discounted rate for a Pack of 5.

These Floplast PushFit products are available in White or Black

For more information on Flolpast Push Fit Waste Plumbing System CLICK HERE

or visit www.floplast.co.uk directly.

.Prices shown include VAT.

32mm x 3m Push-Fit Waste Pipe £2.49	40mm x 3m Push-Fit Waste Pipe £2.99
32mm Straight Coupler for Push-Fit Waste Pipes £0.75	40mm Straight Coupler for Push-Fit Waste Pipes £0.75
32mm x 90° Knuckle Bend for Push-Fit Waste Pipes £0.75	40mm x 90° Knuckle Bend for Push-Fit Waste Pipes £0.75
32mm x 92.5° Swept Bend for Push-Fit Waste Pipes £0.75	40mm x 92.5° Swept Bend for Push-Fit Waste Pipes £0.75
32mm x 135° Bend for Push-Fit Waste Pipes £0.75	40mm x 135° Bend for Push-Fit Waste Pipes £0.75
32mm Tee Junction for Push-Fit Waste Pipes £0.85	40mm Tee Junction for Push-Fit Waste Pipes £0.85
32mm Pipe Clip for Push-Fit Waste Pipes £0.45	40mm Pipe Clip for Push-Fit Waste Pipes £0.45
32mm x 90° Conversion Bend for Push-Fit Waste Pipes £0.75	40mm x 90° Conversion Bend for Push-Fit Waste Pipes £0.75
32mm Socket Plug for Push-Fit Waste Pipes £0.75	40mm Socket Plug for Push-Fit Waste Pipes £0.75
32mm Tank Connector for Push-Fit Waste Pipes £0.85	40mm Tank Connector for Push-Fit Waste Pipes £0.85