Recently Viewed
-:- SPECIAL OFFER -:- 5% discount on all orders over £150 ex VAT

.

FloPlast 110mm Underground Drainage Bottle Gully - Rectangular Grid

FloPlast 110mm Underground Drainage Bottle Gully - Rectangular Grid
  Zoom
Our Price:  £33.33(Inc. 20% VAT)(£27.78 Exc. VAT)
+

Bar Code:  5055149907524
Part Number:  288168
Brand:  FloPlast

  (1 Review)

FloPlast 110mm Underground Drainage Bottle Gully with Rectangular Grid.

This FloPlast 110mm Underground Drainage fitting is suitable to use with 110mm diameter Underground Drainage pipes, couplings &  other fittings.

All FloPlast Gullies hold water to stop foul air escaping from the foul drainage system.  They are designed to accept waste water from kitchens, utility rooms and ground floor bathrooms, rainwater from paved areas and roofs.

It is desirable that the bottle gully be connected to a manhole, but due to the fact that it is roddable it may be positioned up to 22 metres away from one.  However, the Gully must be less than 12 metres from the drain and a set of drain rods must be able to pass right through the junction.

To view FloPlast technical information with regards to the fitting of gullies CLICK HERE
 

All FloPlast underground drainage fittings with sockets have a captive seal and snap cap which are designed to be user friendly with no sharp edges and with space restrictions in mind. These allow for an easy installation. The seal is double ribbed and the sockets incorporate a recessed area to provide space for the rubber seal to locate as the pipe is inserted, forming a high-capacity pressure point.

All the fittings & pipes in our Underground Drainage range comply to the relevant British Standards where applicable.

Avaliable in Terracotta only.

Price includes VAT

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
solid gully
19 February 2020  | 

This is a solid gully, a bit deeper than some which should mean it works better.

Was this helpful to you?  Yes  /  No

This review has not been appraised.